| Home | Articles |
Ken Clunis email: email@example.com
In 1970 the Fuels and Lubricants Laboratory of the National
Research Council of Canada conducted a study of carburetor icing in aircraft engines. A
report submitted by L. Gardner and G. Moon of the laboratory contained a chart of the
icing probability of light aircraft engines which was based on the data by the D. O. T.
Accident Investigation Division (C.A.I.E.). This chart was printed in black and white and
is a little difficult to read. In 1988 The AOPA published an article written by Arthur A.
Wolk on Induction Icing wherein he used the same chart as the Canadians but used colors to
separate the various degrees of icing making the chart much more understandable. This
later chart was used to generate the GIF for this web page but the data is the same as the
one found in the Fuel Laboratory Report. For further details about the
findings of the Research Council on carburetor icing, refer to the article on Carburetor
Icing in the January issue of Central States Newsletter, the April 1988 issue of AOPA
PILOT or , better yet, the report itself, published by the National Research Council -
"Mechanical Engineering Report LR-536" by Gardner and Moon. The findings are
startling, to say the least, and once you read the report, you may be very inclined to
replace your carburetor heat system with something much simpler, but more importantly, one
that works. To quote from the report "The use of ethylene glycol mononmethyl ether
(in conjunction) with the Teflon-coated (throttle) plate and shaft eliminated all ice deposition".